• 1.75mm ColorFabb Copperfill Filament 0.75kg

3d printing with metal on your own desktop 3d printer! This amazing one of a kind filament will allow you to print with actual bronze at home! Straight from the printer parts look almost laser sintered with a matte finish.

With a bit of sanding and polishing the copper particles will start to shine and shimmer unlike any 3d printing filament you have seen before. The weight of the material is something special, about 3 times heavier then our regular PLA/PHA.

Now you can make jewelry that won’t feel like cheap lightweight plastic parts.

 Please note that due to the increased weight of Bronzefill the actual amount of filament on a 750g spool is less than with normal PLA.

 Recommended 3d printing temperature:

195-220C*

Recommended 3d print speed:

40 - 100 mm/s

Recommended Heated bed (if you have one, not strictly necessary)

50-60C

 TIP! Depending on your set-up, 3d printer and slice software, you might see that bronzeFill needs a bit more flow compared to your normal PLA settings. Most plastics will show die swell when coming out of the nozzle tip, this is counteracted with specific slicer settings. Since bronzeFill doesn’t show a die swell such as PLA you might need to increase flow rate a bit, 4-8% was perfect for our UM2. UM original did not need any adjustments.

 TIP! Sanding and polishing your parts will make the bronze particles shine. Start sanding with grit 120-180 and make sure all the printed lines vanish. You’ll notice that because bronzeFill is easy to sand down, careful you won’t loose too much detail. Then start working your way up by following with grit 240-320 and finishing off with grit 600 - or higher. Finally we used a clean soft cloth and some copper polish to really get all of the shine out of the bronze particles.

Write a review

Note: HTML is not translated!
    Bad           Good

1.75mm ColorFabb Copperfill Filament 0.75kg

  • Brand: ColorFab
  • Product Code: Copperfill
  • Availability: 1
  • $89.99

  • Ex Tax: $89.99

Related Products

0.4mm E3D V6 Printer Nozzle

0.4mm E3D V6 Printer Nozzle

E3D V6 original Printer NozzleNozzle Diameter: 0.40mmM6 Threading. Material: Brass..

$9.00 Ex Tax: $9.00

Prusa i3 3D Printer Assembled

Prusa i3 3D Printer Assembled

Large Print Volume 3D Printer AssembledModel: Prusa i3Printing parts color: WhitePrinter size: 420 x..

$930.00 Ex Tax: $930.00

PhotoToMesh

PhotoToMesh

PhotoToMesh is a standalone Windows application which creates 3D meshes from photographs and other i..

$59.99 Ex Tax: $59.99

3D Printer Kit RAMPS 1.4 Control Board 5Pcs 4988 Driver With Heat Sink

3D Printer Kit RAMPS 1.4 Control Board 5Pcs 4988 Driver With Heat Sink

3D Printer Kit RAMPS 1.4 Control Board 5Pcs 4988 Driver With Heat Sink RAMPS 1.4: It has Carte..

$45.00 Ex Tax: $45.00

1.75mm ColorFabb Brassfill Filament 0.75kg

1.75mm ColorFabb Brassfill Filament 0.75kg

3d printing with metal on your own desktop 3d printer! This amazing one of a kind filament will al..

$94.99 Ex Tax: $94.99

1.75mm ColorFabb Bronzefill Filament 1.5kg

1.75mm ColorFabb Bronzefill Filament 1.5kg

3d printing with metal on your own desktop 3d printer! This amazing one of a kind filament will al..

$145.99 Ex Tax: $145.99

Tags: Copperfill