The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

 

Features:

1. Simple step and direction control interface

2. Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step

3. Can interface directly with 3.3 V and 5 V systems

4. Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout

5. Short-to-ground and shorted-load protection

6. 4-layer, 2 oz copper PCB for improved heat dissipation

7. Exposed solderable ground pad below the driver IC on the bottom of the PCB

8. Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)

9. Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates

10. Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)

11. 45 V maximum supply voltage

12. Built-in regulator (no external logic voltage supply needed)

Write a review

Note: HTML is not translated!
    Bad           Good

StepStick DRV8825 Stepper Motor Driver Carrier Reprap 4layer PCB

  • Brand: Geeetech
  • Product Code: DRV88254layer
  • Availability: 1
  • $4.89

  • Ex Tax: $4.89

Related Products

Yellow PLA 1.75mm FILAMENT 1KG Spool

Yellow PLA 1.75mm FILAMENT 1KG Spool

PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such ..

$34.90 Ex Tax: $34.90

GREEN  PLA 1.75mm FILAMENT 1KG Spool

GREEN PLA 1.75mm FILAMENT 1KG Spool

PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such ..

$34.90 Ex Tax: $34.90

Geeetech 3DTouch auto bed leveling sensor for 3D printer

Geeetech 3DTouch auto bed leveling sensor for 3D printer

3DTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print..

$35.00 Ex Tax: $35.00

GT2560 3D printer controller board

GT2560 3D printer controller board

GT2560 is a compact board that is integrated with the mighty function of the  Arduino Mega2560 ..

$69.00 Ex Tax: $69.00

Tags: StepStick DRV8825 Stepper Motor Driver Carrier Reprap 4layer PCB